Search results for "general [gamma ray]"

showing 10 items of 38681 documents

Induced crystallographic changes in Cd1−xZnxO films grown on r-sapphire by AP-MOCVD: the effects of the Zn content when x ≤ 0.5

2020

High-resolution X-ray diffraction, scanning electron microscopy and transmission electron microscopy techniques were used to investigate, as a function of the nominal Zn content in the range of 0–50%, the out-of-plane and in-plane crystallographic characteristics of Cd1−xZnxO films grown on r-plane sapphire substrates via atmospheric pressure metal–organic chemical vapor deposition. The study is conducted to search for knowledge relating to the structural details during the transition process from a rock-salt to a wurtzite structure as the Zn content increases in this CdO–ZnO system. It has been found that it is possible to obtain films exhibiting a single (001) cubic orientation with good …

010302 applied physicsMaterials scienceScanning electron microscope02 engineering and technologyGeneral ChemistryChemical vapor deposition021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesCrystallographyTransmission electron microscopy0103 physical sciencesSapphireGeneral Materials ScienceOrthorhombic crystal systemCrystalliteMetalorganic vapour phase epitaxy0210 nano-technologyWurtzite crystal structureCrystEngComm
researchProduct

Choice of the detectors for light impurities plasma studies at W7-X using ‘CO Monitor’ system

2019

Abstarct The ‘CO Monitor’ is a new spectrometer system dedicated for the continuous measurements of line intensities of carbon, oxygen, boron and nitrogen at the fusion plasma experiment Wendelstein 7-X (W7-X). Its main purpose is to deliver constant information about indicated elements with high time resolution (better than 1 ms), but low spatial resolution since the line shapes are not going to be investigated. The system consists of four independent channels, each equipped with dispersive element dedicated for measurement of selected line of interest. In order to perform the highest efficiency of the ‘CO Monitor’ system, it is essential to choose the proper detector type for this task. T…

010302 applied physicsMaterials scienceSpectrometerbusiness.industryMechanical EngineeringDetectorPhase (waves)PlasmaElectronXUVDetectorsWendelstein 7-XStellarator01 natural sciencesLine (electrical engineering)010305 fluids & plasmasOpticsNuclear Energy and Engineering0103 physical sciencesGeneral Materials SciencebusinessSensitivity (electronics)Image resolutionCivil and Structural EngineeringFusion Engineering and Design
researchProduct

SiC Power Switches Evaluation for Space Applications Requirements

2016

We have evaluated several SiC power switches available on the market, by defining and performing a global test campaign oriented to Space applications requirements, in order to define their main benefits but also the limits of current SiC technology. This allowed to identify a number of target applications where SiC could be used as a technology push for a new generation of space electronics units. Silicon devices qualified for space systems above 600V for the switches and 1200V for the rectifiers are not available due to performances limitations of Si. Among the typical static and dynamic characterization, we have performed temperature and power stress and HTRB tests. More remarkably, we h…

010302 applied physicsMaterials scienceTechnology pushbusiness.industryMechanical EngineeringElectrical engineeringJFET02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesPower (physics)Stress (mechanics)Reliability (semiconductor)Mechanics of Materials0103 physical sciencesMOSFETElectronic engineeringGeneral Materials SciencePower MOSFET0210 nano-technologybusinessRadiation hardeningMaterials Science Forum
researchProduct

Band gap of corundumlike α−Ga2O3 determined by absorption and ellipsometry

2017

The electronic structure near the band gap of the corundumlike $\ensuremath{\alpha}$ phase of ${\mathrm{Ga}}_{2}{\mathrm{O}}_{3}$ has been investigated by means of optical absorption and spectroscopic ellipsometry measurements in the ultraviolet (UV) range (400--190 nm). The absorption coefficient in the UV region and the imaginary part of the dielectric function exhibit two prominent absorption thresholds with wide but well-defined structures at 5.6 and 6.3 eV which have been ascribed to allowed direct transitions from crystal-field split valence bands to the conduction band. Excitonic effects with large Gaussian broadening are taken into account through the Elliott-Toyozawa model, which y…

010302 applied physicsMaterials scienceValence (chemistry)Physics and Astronomy (miscellaneous)Band gap02 engineering and technologyElectronic structure021001 nanoscience & nanotechnologymedicine.disease_cause01 natural sciencesMolecular physicsGaussian broadeningEllipsometryAttenuation coefficient0103 physical sciencesmedicineGeneral Materials ScienceThin film0210 nano-technologyUltravioletPhysical Review Materials
researchProduct

Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date

2018

Abstract Today, cold gas dynamic spray (CGDS) technology has thrived with considerable capabilities for manufacturing various technological depositions. The deposition conditions have been developed through many years and that have led to produce ample experimental data which is available in the literature. But, recent research and development activities also reveal innovative findings regarding various deposition conditions. This paper contains a review of experimental deposition procedures for the cold spray additive manufacturing. Details of processing conditions are reported and classified into various categories of baseline working conditions, specific processing including deposition o…

010302 applied physicsMaterials sciencebusiness.industryBiomedical EngineeringGas dynamic cold sprayMechanical engineering02 engineering and technologyengineering.material021001 nanoscience & nanotechnology01 natural sciencesIndustrial and Manufacturing EngineeringCoating0103 physical sciencesengineeringGeneral Materials Science0210 nano-technologyProcess engineeringbusinessEngineering (miscellaneous)Additive Manufacturing
researchProduct

Emerging blue-UV luminescence in cerium doped YAG nanocrystals

2016

Physica status solidi / Rapid research letters 10(6), 475 - 479(2016). doi:10.1002/pssr.201600041

010302 applied physicsMaterials sciencebusiness.industryDopingchemistry.chemical_elementSynchrotron radiationPhosphor02 engineering and technologyScintillator021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciences530CeriumchemistryNanocrystal0103 physical sciencesOptoelectronicsGeneral Materials Scienceddc:5300210 nano-technologybusinessLuminescence
researchProduct

High-Performance Flexible Magnetic Tunnel Junctions for Smart Miniaturized Instruments

2018

010302 applied physicsMaterials sciencebusiness.industryElectrical engineering02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter PhysicsSmart instruments01 natural sciencesFlexible electronicsTunnel magnetoresistanceReliability (semiconductor)0103 physical sciencesGeneral Materials Science0210 nano-technologybusinessAdvanced Engineering Materials
researchProduct

Deep insight into electron transport and photovoltaic parameters in DSSCs

2019

Dye-sensitized solar cells (DSSCs) based on titanium (IV) oxide (TiO2) nanoparticles and nanotubes (NTs) with different weight ratios and phase compositions were fabricated. The obtained nanostructures were investigated using X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and ultraviolet–visible spectroscopy. Current–voltage measurements and electrochemical impedance spectroscopy were used to investigate the electron transport and photovoltaic performance of DSSCs. An increase of 14% in cell efficiency was achieved by introducing 10 wt% NTs. In this configuration, high dye loading is ensured and substantial improvement in electron transport efficie…

010302 applied physicsNanostructureMaterials sciencePhotovoltaic systemOxidechemistry.chemical_elementNanoparticle02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectron transport chainchemistry.chemical_compoundchemistryChemical engineeringPhase (matter)0103 physical sciencesGeneral Materials Science0210 nano-technologyTitaniumEmerging Materials Research
researchProduct

Hydrodynamic Modeling of Transport and Noise Phenomena in Bipolar Two-Terminal Silicon Structures

1998

International audience

010302 applied physicsNoise temperatureMaterials scienceSiliconMechanical EngineeringShot noisechemistry.chemical_element02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciences[SPI.TRON]Engineering Sciences [physics]/Electronics[PHYS.PHYS.PHYS-COMP-PH]Physics [physics]/Physics [physics]/Computational Physics [physics.comp-ph]NoisechemistryTerminal (electronics)Mechanics of Materials0103 physical sciencesElectronic engineeringGeneral Materials Science[PHYS.COND]Physics [physics]/Condensed Matter [cond-mat]0210 nano-technologyComputingMilieux_MISCELLANEOUSMaterials Science Forum
researchProduct

A comparative study on the compatibility of liquid lead–gold eutectic and liquid lead–bismuth eutectic with T91 and SS 316LN steels

2012

Abstract Liquid lead–gold eutectic (LGE) is considered as a potential target material for high power spallation sources. In the present work, the corrosion effects of LGE on T91 and SS 316LN steels have been investigated in comparison with that of liquid lead–bismuth eutectic (LBE) under the same testing conditions. Two tests were conducted at 400 °C for 1800 h and at 450 °C for 1300 h, in which specimens of the two steels were exposed to 1 m/s flowing LGE and LBE. Surface inspections showed that the specimens underwent a mixed corrosion mode of dissolution and oxidation. The results obtained from the SS 316LN specimens are very interesting. Firstly, EDX (electron energy dispersion X-ray sp…

010302 applied physicsNuclear and High Energy PhysicsMaterials scienceLead-bismuth eutecticMetallurgychemistry.chemical_element02 engineering and technology021001 nanoscience & nanotechnologyMicrostructure01 natural sciencesBismuthCorrosionNuclear Energy and Engineeringchemistry0103 physical sciencesGeneral Materials ScienceSpallationGrain boundary0210 nano-technologyDissolutionEutectic systemJournal of Nuclear Materials
researchProduct